Static Route dengan 3 Router dan 2 LAN

ROUTER KIRI

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int f0/0

Router(config-if)#ip address 180.80.80.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,

changed state to up

Router(config-if)#ip dhcp pool mypool

Router(dhcp-config)#network 180.80.80.0 255.255.255.0

Router(dhcp-config)#default-router 180.80.80.1

Router(dhcp-config)#ex

Router(config)#int s0/0/0

Router(config-if)#ip address 1.1.1.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down

Router(config-if)#clock rate 1200

Router(config-if)#ex

Router(config)#

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0,

changed state to up

Router(config)#ip route 200.200.200.0 255.255.255.0 2.2.2.2

Router(config)#ip route 200.200.200.0 255.255.255.0 2.2.2.1

Router(config)#ip route 200.200.200.0 255.255.255.0 1.1.1.2

 

ROUTER TENGAH

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int s0/1/0

Router(config-if)#ip address 1.1.1.2 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up

Router(config-if)#ex

Router(config)#int s0/0/0

Router(config-if)#ip address

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed

state to up

Router(config-if)#ip address 2.2.2.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down

Router(config-if)#ex

Router(config)#

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

Router(config)#ip route 200.200.200.0 255.255.255.0 2.2.2.2

Router(config)#ip route 180.80.80.0 255.255.255.0 1.1.1.1

Router(config)#ip route 180.80.80.0 255.255.255.0 2.2.2.2

Router(config)#ip route 200.200.200.0 255.255.255.0 1.1.1.1

Router(config)#int s0/0/0

Router(config-if)#clock rate 1200

 

ROUTER KANAN

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int s0/1/0

Router(config-if)#ip address 2.2.2.2 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up

Router(config-if)#ex

Router(config)#int f0/0

Router(config-if)#ip address 200.200.200.1 255.255.255.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface

FastEthernet0/0, changed state to up

Router(config-if)#ip dhcp pool pool2

Router(dhcp-config)#network 200.200.200.0 255.255.255.0

Router(dhcp-config)#default-router 200.200.200.1

Router(dhcp-config)#ip route 180.80.80.0 255.255.255.0 1.1.1.1

Router(config)#ip route 180.80.80.0 255.255.255.0 2.2.2.1

Router(config)#ip route 180.80.80.0 255.255.255.0 1.1.1.2

Share on Google Plus

About Elmirakom

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.